Enclosure Solutions operates a continuous improvement policy. The information contained on this site is provided on an ‘as-is’ basis with no guarantees of completeness, accuracy or usefulness.Errors and omissions excepted.

SCROLL DOWN FOR TECHNICAL INFORMATION
ACCESSORIES AVAILABLE UPON REQUEST

 

 

1590G2OR

100 × 50 × 31 mm

Material: Aluminium

Category: All Products, Diecast & Metal

Die Cast Stomp Box - Orange
£10.59

Low volume indicative cost. Enquire for volume pricing.

Qty:
Add to QuoteAsk a QuestionReport an Error

Enclosure Customisation

CNC Holes, Slots, Shapes, Routing, Custom Colours, Printing and Assembly Kits are available for this product.

ENQUIRE NOW

Manufacturing

PCB Assembly, Wiring, Keypads & Components right up to a full Turnkey Box-Build.

 

 

 

Enquire Now

Product Details

Features

  • Rugged, diecast aluminium alloy (tough – yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Unpainted version is vibra finished for a smooth surface with no sharp edges.
  • Textured black version is coated with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
  • Includes screws threaded into factory-tapped holes. Screw type and quantity vary. See details below or in drawings.
  • Standard versions are designed to meet IP54.
  • Water-tight versions are designed to meet IP65 and include a gasket. Gasket is supplied loose inside the enclosure (not pre-installed).
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

Features:

No mounting flanges
Spot-welded bottom flange
Wall Mounting flange integrated into lid.
Lap joint construction where lid and box meet.
Water-tight versions and gasket upgrades available for most sizes.

Hardware

NOTE: 1590 series enclosures feature factory-tapped assembly screw holes that accept machine screws, which are included with the enclosures. Most sizes require four (4) screws.1590BX, 1590BX2, 1590D, 1590DD, 1590DE, 1590E, 1590EE & 1590R1 require six (6). 1590F requires eight (8). See drawings and/or photos for details.

Replacement Hardware

Tamper-proof Hardware Upgrade (Torx w/ Pin)

See “Hardware” table below for compatibility.


Gaskets

NOTE: Gaskets are included with Waterproof 1590 enclosures. They can also be purchased as a kit if you’d like to upgrade an IP54 enclosure to IP65.

  • Each kit includes two pre-formed silicone gaskets.
  • Gaskets include adhesive backing for easy installation.
  • Allows enclosure to be machined and/or painted first and gasketed later.
  • Gasket is applied to the lid.
  • Gasket as a temperature rating of -40C to +150C
  • Designed to meet IP65 with properly installed gasket and lid screws torqued to 25-30 cN.m (36-43 ozf.in).
  • Refer to part number table below for correct gasket.

Notes

  • Lid height is 0.16″ (4 mm)
  • Don’t forget to order our Waterproof screws (stainless steel with o-ring) when converting a standard enclosure to a water-tight box.

Other 1590-Series Enclosures

  • Nine of our popular stomp box sizes are also available in a variety of colours. See the1590-STOMP?series for details.
  • Three of our popular sizes are also available in diecast zinc (series 1590K4). The zinc alloy is heavy weight, high impact, and easy to machine & plate.
  • The 1590-RIBBED series features internal vertical ribs on the side walls.

Technical

Dimensions 100 × 50 × 31 mm
Colour

Orange

Height

31

Width

50

Length

100

IP Rating

IP54

Manufacturer

Hammond

Material

Aluminium

Flammability

N/A

Shape

Rectangular/Square

Mounting

Wall Mount

Feature

N/A

Series

1590

Downloads

1590G2OR

217.98 KB

Not what you need?

custom Enclosures

Matched to your requirements

Get a Quote

Phone
01206 214 758

Email
support@enclosuresolutions.co.uk

Address
Tey Brook Business Centre
Brook Road
Great Tey
Colchester
Essex CO6 1JE

ASK A QUESTION

If you would like to find out more about what we do or to enquire about our range of standard and custom enclosures, you can get in touch by using the form below.

© Enclosure Solutions 2024