Enclosure Solutions operates a continuous improvement policy. The information contained on this site is provided on an ‘as-is’ basis with no guarantees of completeness, accuracy or usefulness.Errors and omissions excepted.

SCROLL DOWN FOR TECHNICAL INFORMATION
ACCESSORIES AVAILABLE UPON REQUEST

 

 

1554KGY

160 × 90 × 90 mm

Material: ABS

Category: All Products, General Purpose Plastic

Waterproof ABS Enclosure
£12.58

Low volume indicative cost. Enquire for volume pricing.

Qty:
Add to QuoteAsk a QuestionReport an Error

Enclosure Customisation

CNC Holes, Slots, Shapes, Routing, Custom Colours, Printing and Assembly Kits are available for this product.

ENQUIRE NOW

Manufacturing

PCB Assembly, Wiring, Keypads & Components right up to a full Turnkey Box-Build.

 

 

 

Enquire Now

Product Details

Key Features:

  • Ideally suited for mounting printed circuit boards or DIN rail mounted components (see photo features below for details).
  • ABS Versions are moulded from general purpose Material which carries a flammability rating of UL94-HB. ?For indoor use.
  • Polycarbonate versions are UV stabilized for outdoor use. ?Gray poly-carb carries a UL94-5VA rating, while clear and smoked lids carry a UL94V-0 rating.
  • Polycarbonate versions are UL and UL 508A listed (File # E65324). ?ABS plastic versions are not UL listed.
  • Enclosure colour is a light grey (RAL 7035).
  • Gasketed lid with two piece ?tongue & groove? construction provides protection against access of oil, dust and water.
  • Replaceable gasket is one piece made from high temperature, U.L. listed silicone.? Supplied loose inside the enclosure (not pre-installed).
  • Poly-carb versions are designed to meet NEMA Type 4, 4X, 6, 6P, 12 & 13 ratings which meet and exceed IP ratings up to and including IP68.? (Except 1554/55 V size which is 4,4X only)
  • ABS Plastic versions are designed to meet IP66.
  • Lid is secured with included M4 stainless steel machine screws which are threaded into corrosion resistant bushings for repetitive assembly & disassembly. All hardware is designed to avoid corrosion caused by harsh environments over time.
  • Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
  • Internal features are maximized for mounting options and vary with size:
    • Internal DIN rail mounting tabs moulded into most models, except sizes ?C? and ?D?.
    • Threaded (M3) integral brass inserts and/or standoffs (#6 self tapping screws) for P.C. board or inner panel mounting in all but the smallest size (?B?).
    • Vertical P.C. card guides (for 1.5 mm thick P.C. boards) are moulded in all but the smallest size (?B?).

Wall Mounting holes are located outside of the gasket channel

Same Wall Mounting holes can be used to install an accessory foot kit, 1554FT

Internal mounting posts can be used to mount accessory inner panels, PC boards, or DIN rails (inner panel shown)

Technical

Dimensions 160 × 90 × 90 mm
Colour

Grey

Height

90

Width

90

Length

160

IP Rating

IP66

Manufacturer

Hammond

Material

ABS

Flammability

UL94-HB

Shape

Rectangular/Square

Mounting

Free Standing, Wall Mount

Feature

Waterproof

Series

1554

Downloads

1554KGY

508.63 KB

Not what you need?

custom Enclosures

Matched to your requirements

Get a Quote

Phone
01206 214 758

Email
support@enclosuresolutions.co.uk

Address
Tey Brook Business Centre
Brook Road
Great Tey
Colchester
Essex CO6 1JE

ASK A QUESTION

If you would like to find out more about what we do or to enquire about our range of standard and custom enclosures, you can get in touch by using the form below.

© Enclosure Solutions 2024